CWINDY Dual Sided Whetstone
The CWINDY whetstone is made of high-grade corundum. To guarantee the quality, it goes through 17 processes and 3 inspections. This whetstone has two different sides of grain for sharpening and polishing knife edges and comes with a silica gel non-slip base. The brown side is 1000 grit and the white side is 3000 grit. For best results, submerge the stone in water for about 5 minutes. Waterstones should be soaked in a shallow container of water for a few minutes prior to use. The time required will vary based on the stone's porosity. During the honing process, the stone's should also be kept wet. Waterstones do not require storage in water, and care should be taken not to leave a waterstone in water when freezing conditions may occur. Continue to apply water to the stone while sharpening your knife. After sharpening is complete, rinse the stone and clean off the grinding residue. Clean your knife with hot water.